KC roller chain coupling

Introduction to Roller Chain Coupling:    
   The roller chain coupling consists of a pair of sprockets with sleeves, which are connected between the two sprockets by two rows of roller chains connected as a whole. It is mainly used to transfer large torque kc between large diameter shafts. Series chain couplings use a common chain to fix two half couplings with the same number of sprocket teeth together. The main difference between chain couplings of different structure types is that they use different chains. Common ones are Double-row roller chain couplings, single-row roller chain couplings, toothed chain couplings, nylon chain couplings, etc.The performance of the double-row roller chain coupling is better than that of other structural types. The sprocket coupling has a simple structure (composed of four pieces), light weight, small size, convenient assembly and disassembly, and is connected without moving during disassembly. The two-axes can compensate for the displacement of the two-axes in a small amount, and the installation accuracy is not high, the work is reliable, the life is long, and the cost is low. kc roller chain coupling can be used for shafting transmission of textile, agricultural machinery, lifting and transportation, engineering, mining, light industry, chemical industry and other machinery. It is suitable for high temperature, humidity and dust. Severe impact load and torsional vibration are not suitable for high speed and axial force transmission. The chain coupling should work under the conditions of good lubrication and protective cover.Our company supplies all kinds of gl coupling covers and kc coupling covers all year round, welcome to buy.

    Product structure: composed of 40Mn double-row chain, two C45 steel sprockets and aluminum alloy shell

    Adapted motor power: within 250HP/185KW

    Adaptation shaft diameter: 12mm-110mm

 KCRoller chain couplingFeatures:

    1. The double-row chain and sprocket are made according to the requirements of GB1243-1997 "Precision Roller Chains and Sprockets for Short Pitch Transmission"

    2. The chain material is made of 40Mn steel, and has undergone pre-tensioned running-in and surface shot peening to resist fatigue and rust.

    3. The sprocket material is made of C45 steel, and the running teeth are high-frequency quenched and the surface is treated with high temperature oil stains and rust prevention.

    4. Suitable for high temperature, high speed and humid working environment

Basic parameters of KC series sprocket chain coupling: