304 stainless steel clamp housing coupling

    Stainless steel clamp housing coupling:
    The stainless steel clamp shell coupling uses two clamp shells split along the axial direction, which are clamped by bolts to realize the connection of the two shafts. The torque is transmitted by the friction between the two halves of the coupling surface, and the flat key is used as an auxiliary connection. .

    When assembling and disassembling the clamp housing coupling, the shaft does not need to move axially, so the assembly and disassembly are very convenient.The disadvantage is that the accuracy of the axis of the two shafts is low, the structure and shape are more complicated, the manufacturing and balance accuracy is low, and it is only suitable for low speed and When the load is stable, the linear velocity of the outer edge is usually not more than 5m/s. When the linear velocity exceeds 5m/s, a balance check is required.

    In order to improve the balance, the bolts should be installed between the forward and reverse phases.Jacketed couplings do not have axial, radial and angular compensation performance.
   

   Features of JQ type-jacket coupling:
   The characteristics of the JQ shell coupling are similar to those of the shell coupling, simple structure, easy to assemble and disassemble, suitable for low speed (circumferential speed of XNUMXM/S), no impact, stable vibration load, suitable for stirring The connection of the vertical shaft such as the instrument.

    Stainless steel 304 material, JQ type clamp coupling is a commonly used rigid coupling, reliable structure, high strength, good neutrality, easy to use and disassemble, and small radial size.The exterior has been shot blasted and is free of dirt.

    A snap ring divided into two halves is used in the middle of the coupling, which can reliably connect the two shafts into one body.

    It can play the role of suspending agitator for the connection between the mixing shafts in the tank.

    Whether this product is imported or not, the standard number is JQ type clamp coupling, the coupling type is rigid coupling, it is Danone, the model is JQ30~160, the nominal torque is 10000 (nm),
    The shaft hole is 30-160, the external dimension is 340 (mm), the allowable speed is actual (m), and the product type is coupling  

   The radial and angular axis offset performance of the JQ-type-jacket coupling requires minimizing the working conditions of auxiliary working hours.It also squeezes to make the plum elastic spacer and the shaft sleeves on both sides coincide, so as to realize the connection of the two halves of the sliding block coupling.It is often used in situations with strong vibration.The performance limit temperature of the elastomer determines the use temperature of the coupling. It has good versatility and a wide range of applications. It is easy to use and popularize. One of the outstanding advantages of this coupling is that it is difficult to install as long as it is suitable for axis alignment. This guarantees its zero-gap performance.Different from the slider coupling, the plum blossom coupling is driven by squeezing while the slider coupling is driven by shear.In order to improve the balance, the bolts should be installed between the forward and reverse phases.Jacketed couplings do not have axial, radial and angular compensation performance.The characteristics of the vertical clamp coupling are similar to those of the clamp coupling, simple structure, convenient assembly and disassembly, suitable for low speed (circumferential speed of 5M/S), no impact, and stable vibration load. It is suitable for occasions The connection of agitator and other vertical shafts. The shaft does not need to move axially during assembly and disassembly of the JQ type clamp housing coupling, so the assembly and disassembly are very convenient. The disadvantage is that the accuracy of the axis of the two shafts is low, the structure and shape are more complicated, and the manufacturing and balance accuracy is low. When the speed is low and the load is stable, the linear speed of the outer edge is usually not more than 5m/s. When the linear speed exceeds XNUMXm/s, a balance check is required.

   The main products of our factory are rubber tire couplings, roller chain couplings, safety couplings, diaphragm couplings, drum gear couplings, star elastic couplings, elastic sleeve pin couplings Shafts, slider couplings, plum-shaped elastic couplings, roller chain couplings, elastic pin couplings, elastic pin gear couplings, etc.

   All are welcome to call to discuss and visit the factory.

   The stainless steel jacket coupling has the following characteristics:

   (1) Light weight, ultra-low inertia and high sensitivity;

   (2) Maintenance-free, super oil and corrosion resistance;

   (3) Eccentricity cannot be tolerated, and the shaft should be exposed as much as possible during use;

   (4) The main material can be cast iron or cast steel, and stainless steel is used in the case of corrosion;

   (5) The clamp housing coupling is fixed by clamping and the top wire is fixed;