Tag Archives: –

Cixi sales made in China – replacement parts – in Rajshahi Bangladesh Huixin Industrial Rubber Timing Belt Sts-S5m 1100 1115 1120 1125 1145 with top quality

We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 distinct branches. For more details: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

MOULD LI EPT OF STS-S5M

Variety	Pitch length	Tooth No	Width (mm)	Variety	Pitch length	Teeth No	Width (mm)	Sort	Pitch length	Tooth No	Width (mm)
S5M-180	a hundred and eighty	36	two hundred	S5M-620	620	124	450	S5M-1050	1050	210	450
S5M-195	195	39	200	S5M-625	625	a hundred twenty five	450	S5M-1100	1100	220	450
S5M-225	225	45	250	S5M-640	640	128	450	S5M-1115	1115	223	450
S5M-255	255	fifty one	a hundred ninety	S5M-645	645	129	450	S5M-1120	1120	224	450
S5M-260	260	fifty two	one hundred ninety	S5M-650	650	a hundred thirty	450	S5M-1125	1125	225	450
S5M-275	275	55	one hundred ninety	S5M-655	655	131	450	S5M-1145	1145	229	450
S5M-280	280	fifty six	190	S5M-670	670	134	450	S5M-1150	1150	230	450
S5M-295	295	59	190	S5M-675	675	a hundred thirty five	450	S5M-1160	1160	232	450
S5M-300	300	60	190	S5M-680	680	136	450	S5M-1175	1175	235	450
S5M-320	320	sixty four	450	S5M-685	685	137	450	S5M-1195	1195	239	450
S5M-325	325	sixty five	190	S5M-690	690	138	450	S5M-1200	1200	240	450
S5M-335	335	67	450	S5M-695	695	139	450	S5M-1225	1225	245	450
S5M-350	350	70	450	S5M-700	seven hundred	140	450	S5M-1250	1250	250	450
S5M-370	370	seventy four	450	S5M-710	710	142	450	S5M-1270	1270	254	450
S5M-375	375	seventy five	450	S5M-740	740	148	450	S5M-1275	1275	255	450
S5M-385	385	77	450	S5M-750	750	150	450	S5M-1295	1295	259	450
S5M-390	390	78	450	S5M-775	775	one hundred fifty five	450	S5M-1350	1350	270	450
S5M-400	400	80	450	S5M-780	780	156	450	S5M-1380	1380	276	450
S5M-405	405	eighty one	450	S5M-790	790	158	450	S5M-1400	1400	280	450
S5M-410	410	82	450	S5M-800	800	a hundred and sixty	450	S5M-1420	1420	284	450
S5M-420	420	eighty four	450	S5M-810	810	162	450	S5M-1500	1500	300	450
S5M-425	425	eighty five	450	S5M-815	815	163	450	S5M-1530	1530	306	450
S5M-435	435	87	450	S5M-830	830	166	450	S5M-1585	1585	317	450
S5M-445	445	89	450	S5M-835	835	167	450	S5M-1595	1595	319	250
S5M-450	450	90	450	S5M-845	845	169	450	S5M-1605	1605	321	450
S5M-460	460	ninety two	450	S5M-850	850	170	450	S5M-1615	1615	323	450
S5M-465	465	ninety three	450	S5M-860	860	172	450	S5M-1685	1685	337	450
S5M-475	475	95	450	S5M-870	870	174	450	S5M-1690	1690	338	450
S5M-490	490	98	450	S5M-890	890	178	450	S5M-1695	1695	339	380
S5M-five hundred	500	a hundred	450	S5M-900	900	one hundred eighty	450	S5M-1700	1700	340	380
S5M-515	515	103	450	S5M-925	925	185	450	S5M-1715	1715	343	380
S5M-520	520	104	450	S5M-935	935	187	450	S5M-1800	1800	360	200
S5M-525	525	a hundred and five	450	S5M-940	940	188	450	S5M-1900	1900	380	380
S5M-535	535	107	450	S5M-945	945	189	450	S5M-1940	1940	388	380
S5M-550	550	one hundred ten	450	S5M-950	950	one hundred ninety	450	S5M-1945	1945	389	380
S5M-555	555	111	450	S5M-975	975	195	450	S5M-2000	2000	400	380
S5M-560	560	112	450	S5M-980	980	196	450	S5M-2005	2005	401	380
S5M-565	565	113	450	S5M-a thousand	1000	200	450	S5M-2100	2100	420	380
S5M-575	575	115	450	S5M-1571	1571	205	450	S5M-2525	2525	505	380
S5M-600	600	120	450	S5M-1040	1040	208	450	S5M-2980	2980	596	380
S5M-615	615	123	450	S5M-1045	1045	209	450

Our Firm:
HangZhou Huixin Synchronous Belt Co., Ltd. addresses an location of twenty thousand sqm with a more expense of 20 million Yuan RMB. It owns world’s sophisticated belt & pulley production unit. It organizes manufacture in accordance to the mo EPT ideal production method mo EPT superb raw materia EPT & auxiliary resources and by adopting national standard, worldwide specifications and overseas advanced criterion. At existing we have much more than 30 method EPT and 2000 specs. The products offer to thirty domestic provinces, towns, autonomous locations, hundreds of buyers & models, and also export to The us, Europe, southea EPT Asia and so on international countries.
The firm persists in the goal of “prosper company by substantial-tech”. It carries ahead Huixin spirits of “organization & indomitable, establishing & progressive, be daring in achieving first-course”. It wholeheartedly serves broad consumers by its good EPT top quality, reasonable cost and superb services.

Products Sort
one. T type tooth industrial rubber synchronous belt

Type	Pitch	Tooth height	Belt thickness	Angle
MXL	2.032	.51	1.fourteen	40
XXL	three.175	.76	1.fifty two	50
XL	5.080	1.27	two.thirty	fifty
L	9.525	1.91	three.60	forty
H	12.70	two.29	4.30	forty
XH	22.225	6.35	11.twenty	40
XXH	31.750	9.fifty three	15.70	40
T2.5	two.five	.7	1.thirty	40
T5	5	one.2	two.twenty	40
T10	ten	2.50	4.fifty	forty
T20	20	5.00	eight.00	forty
AT5	five	one.twenty	two.70	50
AT10	ten	2.fifty	five.00	fifty
AT20	twenty	five.00	eight.00	50

2. Arc tooth industrial rubber synchronous belt

Gear code	Kind	Pitch	Tooth peak	Belt thickness
HTD	3M	three	one.22	two.forty
	5M	five	two.06	3.eighty
	8M	8	3.36	six.00
	14M	14	six.02	ten.00
	20M	20	8.forty	13.twenty
STPD/STS	S2M	2	.seventy six	one.36
	S3M	three	one.14	one.ninety
	S4.5M	4.five	1.71	2.81
	S5M	five	one.91	three.40
	S8M	8	3.05	5.thirty
	S14M	14	5.30	ten.20
RPP/HPPD	P2M	2	.76	1.36
	P3M	three	1.fifteen	one.90
	P5M	5	one.ninety five	3.50
	P8M	eight	3.twenty	five.fifty
	P14M	14	six.00	ten.

Raw supplies
1.Belt:neoprene (CR) as the principal raw materia EPT (imported from Japan)
two.Skeleton supplies:glass fiber (imported from Japan)
3.Tooth floor: nylon 66 higher spandex
Qualities:
1.Anti-cracking qualities
two.Ozone outstanding efficiency
three.Anti-aging
four.Heat resistance
5.Oil resistance
6.Abrasion-resistant
7.Tiny first pressure
eight.Precise transmission ratio and without slip
Characteristics:
1.With synchronous belt travel is the use of tooth and tooth meshing with the impetus to go a new sort of transmission method
two.With exact synchronous transmission operate, do not beed lubrication and so slip,no air pollution, much less sound, transmission effectiveness of .ninety eight, the speed ratio variety up to 1.10, allowing wire velocity up to 50/seconds, the transmission price from a number of hundred watts to the hundreds of kilowatts, suited for numerous axis push
Our Provider
* Inquiry and consulting assistance. * Sample testing assist
* See our Manufacturing facility. * Provider after income
* Fa EPT Shipping * Reputable shipment

Contect Us:
Include: No.288, Shengshan Street(west), Shengshan City, HangZhou Metropolis, ZHangZhoug, China
Tel: +86~571-8822571/8822 0571 -63542128
Cellular: 155718571
For a lot more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of first tools manufacturer’s (OEM) portion figures or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our business and the listed replacement components contained herein are not sponsored, accepted, or produced by the OEM.

Cixi sales made in China - replacement parts - in Rajshahi Bangladesh Huixin Industrial Rubber Timing Belt Sts-S5m 1100 1115 1120 1125 1145 with top quality

Auto best made in China – replacement parts – in Nizhniy Novgorod Russian Federation Part Timing Tensioner Pulley for Ranger 2012 Bk3q-6c3AA-Ab with top quality

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Product Name	auto part timing tensioner pulley for ranger 2012 BK3Q-6C3AA-AB
Brand Name	ZTR
Car	FOR FORD RANGER
OEM	BK3Q-6C3AA-AB
Guarantee	1 Years
color	BLACK
size	EPT SIZE
payment	Paypal
Material	METAL

EPT PRODUCT

FAQ
Q1. Are you trading company or factory
A: we are invested factory with trading company

Q2. what products does your company supply for EPT brand ?
A: 1) Control arm and ball joint ,tie rod end ,rack end ,linkage .
      2) Drive shaft ,cv joint ,and tripod joints
      3) Wheel hub ,wheel bearing
      4) Brake pads ,brake shoes ,brake caliper ,brake disc
      5) Steering rack ,steering pump ,steering knuckle
      6) Shock absorber
      7) Engine mount
      8) Clutch plate ,clutch cover
      9) Ignition coil ,clock spring ,
      10) fuel pump ,oil filter ,fan belt ,timing belt ,tensioner pully.

Q3. what is the MOQ for each items
A: if the items we have stock ,there is no limitation for moq ,and narmally MOQ as 10pcs
is acceptable.

Q4. do you give any guarantee to your products ?
A: Yes ,we have 1years quality guarantee . Only brake pad ,brake shoe ,fan belt timing
belt is gurantee 50000KM .

Q5. how does to control your EPT products ?
A: 1. There is advanced equipment,professional and technical workersin the factory.
2.Factory will have sample testing on quality before shipment.
3.Our QC(QUALITY CONTROL) will check the quality of each productbefore shipment.

Q6. How long for delivery time after pay deposit?
A: Usually 5-20 days.
Some hot sales items have stock.

Q7. which countries have you exported for EPT brand ?
A:   ASIA: Iraq, Lebanon, UAE, Turkey, Malaysia, Vietnam, LAOS, Thailand ,Syria, Saudi Arabia
       EUROPE: Russia, Kazakhstan, turkmenistan , azerbaijan Ireland ,new celedonia ,
       OCEANIA: Australia, Fiji, Kiribati,
       AMERICAS: Panama,Xihu (We EPT Lake) Dis.via, Canada, , Peru, Chile, Paraguay,Guatemala, Barbados
       AFRICA: Nigeria, Angola, , Ghana, Egypt ,UgHangZhou,Burkina faso,Libya ,Mozambique

Q8. How can I pay you?
A: After you confirm our PL,we will reque EPT you to pay. T/T(HSBC bank) and Paypal,Westem Union are the mo EPT usual we are using.

Q9. What’s the order porcedure?
A: Firstly, we will confirm all the goods detai EPT like the EPT number, packing, quantity, delivry times by emails/wechat/whatsApp/skype, them we will send the commercial invoice to u. When we receive u 30% deposirt,we will start to produce the goods,after goods are finished, we will send the goods picture to u or u come over inspection, after receive u balance, we will send the goods to u.

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

Auto best made in China - replacement parts - in Nizhniy Novgorod Russian Federation Part Timing Tensioner Pulley for Ranger 2012 Bk3q-6c3AA-Ab with top quality

sales made in China – replacement parts – in Diwaniyah Iraq with top quality

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 different branches. For more information: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 We have exported our items to Korea, Turkey, Bulgaria, Romania, Russia, Italy, Norway, the United states of america, Canada, and many others. We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 distinct branches. For much more information: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of authentic gear manufacturer’s (OEM) part numbers or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating solution use and compatibility. Our firm and the shown alternative parts contained herein are not sponsored, accepted, or made by the OEM.

sales made in China - replacement parts - in Diwaniyah Iraq with top quality

Xh400 factory made in China – replacement parts – in Can Tho Viet Nam Steel Cast Iron Timing Pulley with top quality

We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 distinct branches. For a lot more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Overview

———————————————————————————————————————————————————————————————————————————————–
Timing Pulley Numbers:XL, L, H, XH & 3M, 5M, 8M, 14M, 20M

Common Timing Pulleys Introduction:
&Materials:ASTM G-3000 or or C1045 metal,For each and every batch of casting,inspection certification including chemcial composition, tensile energy, hardness and many others will be examined & issued for every batch metal substance, subsupplier will give substance certification issued by steel plant.
&Machining:Precesion machining for pulley with inventory bore, taper bore .
&Addition:With Flang, and Keystocks when Required.
&Complete: Black oxide for steel Timing Pulleys,black phosphate for ca EPT iron Timing Pulleys.
&Bundle: Cartons with sealed plastic bag.

Timing Pulleys:Produced to Orders’ Prints and/or Samples

EPT Timing Pulleys Introduction:
&Material:Aluminium,Alloy material and many others.
&Finish:No surface treatment method,oiled.
&Package deal: Cartons with sealed plastic bag.
———————————————————————————————————————————————————————————————————————————————–
EPT Capacity
EPT Potential: 20000 Piece/Parts for every Thirty day period
Additional Service: EPT is welcome
QC System: ISO9001:2008
———————————————————————————————————————————————————————————————————————————————–
Packaging & Shipping
Package: Wooden box/Paper carton
Port: HangZhou/ZheJiang or on request
———————————————————————————————————————————————————————————————————————————————–

About EPT since 1984
HangZhou Melchizedek Import & Export Co., Ltd. is a leader manufactur in mechanism discipline and punching/stamp
ing discipline considering that 1984. Our principal merchandise, NMRV worm gear speed reducer and sequence helical gearbox, XDR,
XDF, XDK, XDShave attained the innovative technique index of the congeneric European and Janpanese produc
ts, We offer you normal gears, sprockets, chains, pulleys, couplings, bushes and so on. We also can accept orders
of non-common items, these kinds of as gears, shafts, punching parts ect, in accordance to customers’ Drawings or sam-
ples.

Our company has comprehensive set of products including CNC, lathes, milling equipment, gear hobbing machine, g-
ear grinding device, gear honing equipment, equipment shaping equipment, worm grinder, grinding devices, drilling m-
achines, boringmachines, planer, drawing benches, punches, hydraulic presses, plate shearing machines and s-
o on. We have advanced testing equipments also.

Our firm has recognized favorable cooperation interactions with sub-suppliers involving casting, uncooked mat-
erial, warmth remedy, floor ending and so on.

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For a lot more information: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of authentic tools manufacturer’s (OEM) element quantities or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating merchandise use and compatibility. Our organization and the shown substitution parts contained herein are not sponsored, accepted, or created by the OEM.

Xh400 factory made in China - replacement parts - in Can Tho Viet Nam Steel Cast Iron Timing Pulley with top quality

manufacturer made in China – replacement parts – in Chiang Rai Thailand with top quality

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 various branches. For far more details: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 Obtaining amassed valuable knowledge in cooperating with foreign consumers, a specialised supplier of a complete variety of chains, sprockets, gears, gear racks, V-belts, couplings and reducers， pto shaft, agricultural gearboxes…. We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 various branches. For far more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of original products manufacturer’s (OEM) element quantities or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating product use and compatibility. Our company and the shown alternative elements contained herein are not sponsored, accredited, or created by the OEM.

manufacturer made in China - replacement parts - in Chiang Rai Thailand with top quality

Eco sales made in China – replacement parts – in Tel Aviv Israel Friendly High Hardness China Manufacture Coil Winding Machine Tungsten Carbide Nozzle with top quality

We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 different branches. For a lot more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Eco Pleasant Large Hardness China Manufacture Coil Winding Device Tungsten Carbide Nozzle

Product description

Coil winding wire information Nozzles(TungstenCarbide nozzle)also contact wire manual tubes, wire guidebook eyelets, wire guide needles.

it is employed on coil winding equipment. It is manufactured exactly of difficult alloy and enjoys the hardness up to HRA90.

Two termina EPT and innerle are all acquire mirror floor treatment to make sure enameled wire helps make no scrape. High hardness, resistance to flexure, block and affect.

Merchandise Functions:

1. High Use Resistance
This is certain by the option of materia EPT for wear factors possessing. Hardness Worth: 1800 ~ 2200Vickers, or 3times that of circumstance hardened metal. Human body substance is stainless steel for structural supports, not use-bearing.

2. Scratch-Proofing
Eliminate wire insulation film harm, minimal friction resistance, secure wire stress. The wire-guiding surfaces are mirror finished by diamond lapping to a area roughness of 2 -4 micro inches Ra or far better, material allow.

three. Straightness and Stiffness
Straightness and Stiffness are defined by the wire exit currently being concentric and inflexible with respect to the nozzle finding? . In basic terms, the wire must exit from the nozzle concentric to the finding? To inside of .02 mm, with or without having load. A geometric attribute presentation is demonstrated at higher left. Concentricity to inside .01mm.

four. Specific Exit Radii
Since the coil winding nozzle’s Exit Radii governs the angle of the wire exit from 1 coil to the subsequent, it need to be monitored to + / – .571 mm. This is carried out by digital measurement, demonstrated at higher appropriate.

Prodict Specification:
Measurements:
Customize obtainable by requested, exterior diameter is ruled by nozzle wall thickness. See the measurements drawing to affirm your nozzles measurements in accordance to your winding machine and coil products.

Processing restrict: D1≥ .2mm, D1≥ .7mm

NO	Design	L	L1	D	D1	d	d1	H
one	W5710-.8-0602	20	two	.8	.6	.2	.two
two	W571-1.5-1007	thirty	7	1.five	one	.5	.five
three	W571-2-1007	30	seven	2	one	.5	.5
4	W571-2-1210	35	10	2	one.two	.5	.five
five	W571-2-1007	35	7	2	1	.four	.four
6	W0330-2-0808	thirty	8	two	.eight	.3	.3
8	W0326-2-1007	26	seven	2	1	.3	.three
nine	W571-2-1571	thirty	ten	2	1	.5	.five
11	W835-2.5-2011	35	eleven	two.5	two	.eight	.8
12	W0330-2-1006	30	6	two	one	.three	.three
13	W 0571 -2-1215	35	15	2	one.two	.six	.six
fifteen	W571-3-1571	thirty	10	3	1	.5	.five
sixteen	W0630-3-1008	thirty	eight	three	1	.six	.6
seventeen	W03303-0807	thirty	seven	three	.eight	.three	.three
19	W0630-3-1309	30	nine	3	1.three	.6	.6
21	W0614-3-1509p	14	nine	three	one.five	.six	.6	five
22	W1014-3-1509p	14	nine	three	one.five	one	1	5
23	W571-3-1009p	fourteen	nine	three	1	.four	.4	5
24	W1030-three	thirty		three		1	1
25	W0326-3-0808	26	8	three	.eight	.three	.three
29	W0626-3-1208	26	8	3	one.two	.six	.six
30	W1030-3-2014	30	14	3	two	twelve	12
31	W1230-3-2514	30	14	three	two.five	1.two	one.2
33	W0330-3-0502	thirty	2	three	.5	.three	.three
34	W0626-3-1208	26	eight	three	1.two	.6	.six
36	W0330-3-0504	thirty	four	three	.5	.3	.three
37	W0823-3	25		three		.8	.8
38	W571-1211	35	11	three	one.2	.four	.four
39	W5715-3-0811	35	eleven	3	.8	.35	.35
41	W1571-3-1608	twenty five	eight	3	1.six	1	1
42	W0845-3-2017	forty five	seventeen	three	two	.8	.eight
forty three	W1535-3	35		3		1.five	one.five
forty four	W1036-3-2016	36	sixteen	3	two	one	1
45	W0630-3-1212	thirty	12	3	one.2	.6	.6
forty six	W 0571 -4-2015	30	15	4	two	.8	.8
47	W1243-4-2515p	forty three	15	four	two.5	one.two	1.2	twenty
48	W0843-4-2015p	32	fifteen	4	two	.8	.eight	20
49	W1232-4.five	forty three		4.5		one.two	1.two
50	W1543-4-2512p	forty three	12	4	2.5	1.five	1.5	20
fifty one	W0843-3.9-2019p	twenty	19	3.nine	two	.8	.eight	19
52	W2571-five	20		5		2	2

Display of Merchandise

Information of our organization

HAR EPT Technologies Business Co., Ltd , found in 2001, is located in the beautiful city of China’s manufacturing market HangZhou Town. It is fully commited to nozzle, ruby merchandise, tungsten carbide items, ceramic products, plastic crochet hook and precision equipment production .Our principal products are nozzle, ceramic roller, jump wire preventer, different measurements of ceramic eyes, combination wire roller, ceramic wheel and non-standard areas, all sorts of pressure and so on.

FAQ

1. How can I get a quotation?

You can uncover our make contact with information below this webpage and some detail information will be very valuable to get an specific quotation. We will give quotation in 24hours, if urgent, remember to explain to us and we will regard your inquiry precedence.

2. How can I get a sample?

As the price confirmed, you can require for samples.

3. Can you do the design for us?

Yes, we have our manufacturing facility and we can make EPT order.

four. How long can I expect to get the sample?

Normally it will take 7-15days to make the sample.

five. What about the lead time for mass production?

It depends on what variety of goods you ordered. Generally, 15-25days for mass get.

We sincerely hope to get your inquiry of this voice coil actuator! If any questions, you should really feel free of charge to make contact with us. Many thanks for browsing our website!O(∩_∩)O

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 distinct branches. For much more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of first tools manufacturer’s (OEM) element quantities or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating item use and compatibility. Our company and the detailed alternative elements contained herein are not sponsored, accredited, or made by the OEM.

Eco sales made in China - replacement parts - in Tel Aviv Israel Friendly High Hardness China Manufacture Coil Winding Machine Tungsten Carbide Nozzle with top quality

manufacturer made in China – replacement parts – in Rome Italy with top quality

We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 various branches. For a lot more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 We will give be EPT solutions and large high quality items with all sincerity. a specialised supplier of a total range of chains, sprockets, gears, equipment racks, V-belts, couplings and reducers， pto shaft, agricultural gearboxes…. We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 different branches. For much more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of first products manufacturer’s (OEM) part figures or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating merchandise use and compatibility. Our organization and the detailed substitution areas contained herein are not sponsored, authorized, or made by the OEM.

manufacturer made in China - replacement parts - in Rome Italy with top quality

Cost made in China – replacement parts – in Ardabil Iran with top quality

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 diverse branches. For more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 In 2008, it was awarded with “Nationwide Export Commodity Inspection-free of charge Organization”. We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For a lot more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of first products manufacturer’s (OEM) component quantities or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating merchandise use and compatibility. Our company and the listed replacement components contained herein are not sponsored, authorized, or produced by the OEM.

Cost made in China - replacement parts - in Ardabil Iran with top quality

Viktec shop made in China – replacement parts – in Pekan Baru Indonesia CE Vt01318 Fast Shipping with 18PC Alternator Freewheel Pulley Removal Set with top quality

We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 distinct branches. For far more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Merchandise Description:
.Permits simple elimination of freewheel alternator pulley, either on or off the car.
.Permits alternator shaft to be held although the pulley retainer is removed.
.Incorporates a complete assortment of mix TRX-Star*, spline and hex adaptors to in shape mo EPT alternators.
.Combined Socket Bits:
1/2″Sq Travel TRX-Star* – T50-33T x 113mm, Spline – M10-33T x 113mm,
three/8″Sq Push Spline – M10-33T x 80mm
.Socket Bit: 1/2″Sq Travel Spline M10 x 140mm
.33 Tooth Spline Adaptor: 15mm x 33T, 22mm x 33T
.Hex Adaptors: 22, 22 x 28, 19 x 28mm
.Round Adaptor: 35mm-4 pin
.Bits:
10mm Hex TRX-Star* – T40, T50, Spline – M8, M10, H8, H10,
12mm Hex Spline – M10
.Adaptor: 1/2″Sq Travel x 10mm Hex.
VIKTEC Items Variety:

Our Partners:

Viktec Firm Introduction:
HangZhou Dicong EPT Co.,Ltd with VIKTEC a s its registered manufacturers, is a manufacturer and exporter of automotive specialty equipment,precision shafts and some unique air instruments. We also provide the support of design and create all feasible as well EPT for every day life use.

Possessing been concerned in EPT and ODM tools’ organization for a lot more than 20 a long time. We now have stable consumers in United states,Europe,Australia,South The usa,etc. We ensure consumers of both quality merchandise and back-up services.

We operate in a extremely critical way at every single stage of production, top quality control and packaging. Our clientele take pleasure in the business with us usually.We have been establishing new items at every quarter of 12 months to comply with up the sector marketplace and make our customers content. This is the main purpose why our business retains a good standing in exports.

Mo EPT important of all, we are the mo EPT complete, competent and educated automotive specialty tools’ provider in China. We are youthful and energetic to supply you outstanding services.

Our Good quality Manage and Certification:

Why Decide on Us:
·More than 21 several years encounters on planning, production and exporting in specialty equipment.
·Reasonable cost from factory’s providing straight.
·EPT coloration, label, manual and deal are Welcomed.
·R&D group is qualified to do personalized venture for EPT orders.
·Standard items in inventory ensure the punctual shipping time.
·Inspection is carried out all by way of the generation process.
·Export revenue team is specialist to serve clients, quick react and superb right after-revenue.
·Convenient transportation, 1 hour by truck transported to HangZhou port.
·Complianced with “CE”, “Get to”,”TUV” Management with “ISO9001:2008”

FAQ:
.Are you manufacturing facility ? Can you export the merchandise right ?
-Yes. We are investing and producing business,we can export the products by ourselves.
.What do you do?
– Our goods mainly consist of: automotive specialty as well EPT like motor instruments,timing equipment, below vehicle instruments, brake equipment, air condition tools, specific sockets,compression testers,precision shafts and some distinctive air equipment, and so forth…
.How to handle the quality?
-Total examine on assemble line by skilled device. Completed product and packaging inspection
.Can you do EPT for us ?
– EPT are welcome for us. Customers’ brand, brand, label can be tailored for the merchandise and carton package, but based mostly on a specific amount.
.Can you support us to do some change about your item?
– Yes, specific drawing and design and style will be evaluated by our specialized section, device co EPT will be calculated by finance division for your ultimate confirmation. All procedures will be educated and verified with you in progress.
.Can I get a totally free sample?
– Yes, samples are cost-free. But specific co EPT is on buyer’s account.
Shipping approaches: EMS, DHL, FedEx, UPS, TNT, China Publish.
.What is the trade conditions and payment terms?
-Trade terms: FOB &CIF ,C&F . Payment time period : T/T , thirty% as deposit , 70% before delivery.
.How about the time of supply ?
-Truthfully, it is dependent on the purchase amount and the season you place the buy.Generally,the shipping and delivery will be close to 15-twenty five days.

Manufacturing unit Demonstrate:

VIKTEC Personalized Package Provider:
Viktec could supply various sort of the personalized bundle in accordance to your requirement.

Welcome to send out your enquiry. Viktec will try out our be EPT to reply each enquiry within 24 hours.
Thank you so a lot for your assist and pick Viktec Tools.

We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 various branches. For a lot more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of first gear manufacturer’s (OEM) portion quantities or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating merchandise use and compatibility. Our organization and the shown substitute parts contained herein are not sponsored, accepted, or made by the OEM.

Viktec shop made in China - replacement parts - in Pekan Baru Indonesia CE Vt01318 Fast Shipping with 18PC Alternator Freewheel Pulley Removal Set with top quality

OEM manufacturer made in China – replacement parts – in Makassar Indonesia Aluminum Die Casting Parts for Auto Parts Housing with top quality

We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 diverse branches. For far more information: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Custom Casting aluminum Pump Case with CNC Machining

Generation Specifics

Grade	A356 A360 AC2C
Product weight	From .05kg to 20kg
Heat Treatment	T6 Heat Treatment Continue
Surface finished	Sandblasting, painting, polishing,powder coating
Applied software	Professional/E,Auto CAD,Solid Work ,CAXA, UG, CAD/CAM/CAE
Machining equipments	Gravity Casting machine -23 Sets Sand Core machine -15 Sets Continue T6 heat treatment machine-1 sets Sand blasting machine-3 sets CNC -eighty sets CNC Lathe- 25 sets Drilling machine – 100 sets
Main products	Intake Manifold series,Cylinder Head series and Pump series Train spare parts and all kinds of aluminum casting parts They can be produced according to customers’ designed drawings
Support	OEM service available

Production Capacity:
one: 2 set ABB Robotic arm arm for auto cast cylinder head mould.
operation 6 set moulds for cylinder head,/2 shift/1200pcs each day.
Average 20Tons aluminum each day.
2: Traditional casting:
Flexible replacement of different mould casting.
2 shift operation for 10~20 kinds of item.
Total 1000~2000 piece parts is casting capacity each day.
three: Machining:
For Cylinder Head:(A,B,C,D,E,F) six lean production lines for machining cylinder head.
24hours working.
Total finished machining part1000pcs and shipment 1000pcs each day.
For Export Part:
15 sets CNC machine can be 24hours working for several hundred different part.
There are flexible replacement in production.
More than Tens of thousands of different export part on each month.
Total 1000~2000piece parts finished each day.

Process	Force Die Casting
Materials	Aluminum: ADC 12, A380, A356 ZInc: Zamak 3, Zamak five
Finish	CNC machining
Area Treatment method	sand casting, powder coating, anodizing
Mould existence	fifty,000-a hundred,000 shoot times
Shipping and delivery time	In accordance to creation situation

Primary Characteristics
one. Zamak 3 or Zamak five
2. Heat sink for auto parts or equipment parts
3. 8 cavities one particular mould
4. grinding by hand
Area Remedy
Boring sharpening
Mirror sharpening
Electro sharpening
Sand blasting
Vibration grinding
Shot blasting
Report:
one. Dimensions report
2. Material report
3. Ro EPT certificate (Third Party)

Inspection tools
1. Hardness
2. Floor roughness
3. Spectrum
four. Calipers
5. Go no-go gauge
Packing Detai EPT : Packing, solid bicycle saddle, 50pcs/carton
Shipping Detai EPT : 3-thirty days soon after buy of Strong bicycle tire tubes

Q: Why decide on EPT item?
A: We shengao have our possess plant– HangZhou EPT equipment Co., Ltd, for that reason, we can certainly guarantee the good quality of every item and provide you comparable price.

Q: Do you give EPT Services?
A: Indeed, we provide EPT Service.

Q: Do you offer customized products?
A: Sure. Clients give us drawings and specifications, and we will manufact accordingly.

Q: What is your payment expression?
A: We give types of payment conditions these kinds of as L/C, T/T, Paypal, Escrow, and many others.

We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 distinct branches. For far more information: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of first products manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating solution use and compatibility. Our organization and the outlined replacement parts contained herein are not sponsored, accepted, or produced by the OEM.

OEM manufacturer made in China - replacement parts - in Makassar Indonesia Aluminum Die Casting Parts for Auto Parts Housing with top quality

tooth coupling

As one of leading tooth coupling manufacturers, suppliers and exporters of mechanical products, We offer tooth coupling and many other products.