JSP type serpentine spring coupling with brake disc

    JSP type serpentine spring coupling with brake disc and its application range:

    The mechanical characteristics of the JSP type brake disc serpentine spring coupling power machine have a certain impact on the entire transmission system. For different types of power machines, due to their different mechanical characteristics, the corresponding power machine coefficients should be selected to select the coupling suitable for the system Shaft.

    Compared with straight-tooth couplings, JSP type serpentine spring couplings with brake discs have small dimensions, large load-bearing capacity, and work reliably at high speeds.
    Application: Suitable for smelting, steel rolling, heavy machinery, steam turbine, petrochemical industry, shipbuilding and other industries.

    JSP型带制动盘型蛇形弹簧联轴器型号有：JSP1、JSP2、JSP3、JSP4、JSP5、JSP6、JSP7、JSP8、JSP9、JSP10、JSP11

    The characteristics of the torque transmission of the serpentine spring of the serpentine spring coupling:

    The serpentine spring coupling is a designed non-metallic coupling that relies on serpentine springs to transmit torque.Its vibration damping function is good, the use time is long, the load change is large, and the starting insurance is high; the transmission efficiency is high, the operation is reliable, the noise is low, the smoothness is good, the design is simple, the assembly and disassembly are convenient, and the larger assembly deviation is allowed.
    1 Assemble carefully, and grasp the bias. Although the serpentine spring coupling allows a larger assembly bias, it should also be within the rule value during assembly.
    (1) Align the gap between the two-lobe coupling and the angular deviation. When assembling, measure the gap between the two-lobe coupling every 90, and the difference between the value and the minimum value does not exceed 038mm
    (2) Alignment of radial deflection.Place a ruler on the two-part coupling, measure it every 90, and check with a ruler. The radial deviation does not exceed 038mm.
   2 It is better to choose a suitable lubricating grease with an oil injection point temperature of ≥150℃, which can resist the action of centripetal force, and has a combination of stability, no impurities, and no corrosion of carbon steel and nitrile rubber.
   3 Filling in the shortage amount of lubricating grease Sufficient smooth grease is very important for the operation of the coupling, and it is recommended to review it annually.Use a dry grease gun to inject smooth grease until a proper amount of smooth grease overflows in the hole

    The function of the serpentine spring coupling with brake disc:
    The serpentine spring coupling with brake disc bears a large variable load range, and the start is safe. The tooth surface of the two half couplings and the reed is curved. When the transmission torque increases, the spring will follow the curved surface of the tooth. Deform to make the force points of the two half couplings acting on the reeds close.

    The contact point between the reed of the serpentine spring coupling with a brake disc and the tooth surface, that is, the change of torque, changes with the size of the transmitted torque, and its transmission characteristics are variable stiffness.

    The serpentine spring coupling with brake disc has a greater load variation than general elastic couplings.The cushioning effect produced by the transmission force when the reed deforms along the tooth arc, especially when the machine is started or under strong impact load, can protect the safety of supporting parts to a certain extent.