DUMP TRAILER Energy UNIT-DOUBLE ACTING
This power unit features a power up power down circuit with load holding on each A & B ports. A stress compensatred flow manage is usually extra to circuit to regulate the decent pace with the cylinder.
one. This energy unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean every one of the hydraulic components concerned prior to installation of the energy unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst, which must also be clean and cost-free of impurities. N46 hydraulic oil is encouraged.
four. The electrical power unit ought to be mounted horizontally.
5. Check the oil degree from the tank just after the preliminary running with the electrical power unit.
6. Oil modifying is needed after the original one hundred operation hours, afterwards when each 3000 hours.
DUMP TRAILER Power UNIT- SINGLE ACTING
This energy unit includes a power up gravity down circuit. Begin the motor to lengthen the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve could be supplied if expected. Also a pressure compen sated movement management might be added on the circuit to regulate the descent speed on the cylinder.
Remark: Please check with our revenue engineer for your various pump displacement, motor power or tank capability.
1. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean all the hydraulic elements concerned ahead of installation of the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst,which need to also be clean and free of impurities.N46 hydraulic oil is encouraged.
four. The power unit need to be mounted horizontally.
5. Check the oil degree while in the tank just after the original running on the power unit.
six. Oil changing is needed just after the initial one hundred operation hours, afterwards the moment every single 3000 hrs.