ep

January 14, 2021

Double Pitch roller chains are generated in accordance with all the ASME/ANSI B29.three (Transmission Series) and B29.4 (Conveyor Series) American roller chain standards. On the whole these chains are related to ASME/ANSI conventional products except that the pitch is double. They can be out there in Transmission Series, Conveyor Series with Regular (modest) Rollers and Conveyor Series with Significant (oversized) Rollers.
Transmission Series
This series is usually applied on drives with slow to moderate speeds, minimal chain loads and lengthy center distances. Side plates have a fi gure ?¡ã8?¡À contour. The chain amount is obtained by adding 2000 to the ASME/ANSI chain quantity as well as prefi x letter ?¡ãA?¡À. Note that some companies do not use a prefi x letter for this series so the chains could be represented as A2040, A2050 and so on. or 2040, 2050 and so on.
Conveyor Series with Normal (smaller) Rollers
This series is often made use of on light to reasonable load material dealing with conveyors with or devoid of attachment hyperlinks. The side plate contour is straight for improved sliding properties. Pitch sizes of 1-1/2?¡À and greater have ?¡ãHeavy?¡À series website link plates (i.e. link plates on the subsequent larger chain dimension. The chain variety is uncovered by including 2000 to the ASME/ANSI chain quantity and also the prefi x letter ?¡ãC?¡À. Chains using the ?¡ãheavy?¡À form side plates use a suffi x letter ?¡ãH?¡À.
Conveyor Series with Big (oversized) Rollers
These chains possess huge rollers to ensure that the chain rolls on the conveyor track minimizing friction. Chain numbers are found while in the same way as mentioned over except that the last digit about the chain number is transformed from ?¡ã0?¡À to ?¡ã2?¡À which denotes the significant roller.
Sprockets
Normally sprockets ought to be generated specially for these chains in accordance for the ASME/ANSI B29.three and B29.4 standards however, for Transmission Series and Conveyor Series with Common (smaller) Rollers, ASME/ANSI B29.one Typical roller chain sprockets may perhaps be utilized supplied the amount of teeth is 30 or a lot more.