The flexible element of the coupling should not be used for axial adjustment.The gasket set on the high-performance coupling is used to deal with length errors during installation.Diameter less than 6 inches (15
Our company is well-equipped and has strong technical force.It is a manufacturer of various types of couplings.The main products are: various star-shaped elastic couplings, tire type
The rotation centers of the two shafts of the coupling connected to the pump and the motor should be strictly concentric.During the installation process, the coupling should be aligned and centered, otherwise the coupling
In the 20s and 60s, automobile universal joints were widely used in developed industries.After the reform and opening up, with the introduction of large-scale industrial installations, automobile connection
1. The use of expansion sleeves makes the manufacture and installation of the host parts very simple.The processing of shafts and holes with expansion sleeves does not require high precision like interference fit
The basic parameters and dimensions of the elastic pin-tooth coupling are mainly determined by the diameter of the shaft hole.However, the basic parameters and main dimensions of the coupling and the diameter of the shaft hole are not
In order to accelerate the development of my country's coupling industry, mutual cooperation and mutual development between coupling factories are essential.In recent years, due to the servo motor industry
The structural characteristics of the elastic coupling: 1. One-to-one metal elastic body 2. Zero rotation clearance and synchronous operation 3. The elastic action compensates for radial, angular and axial deviations 4. High
1. Select the standard coupling.When choosing a coupling, the designer should first choose among the couplings that have been established as standards, mechanical industry standards, and patented couplings.
When disassembling the torx coupling, the connecting bolt is usually disassembled first.Because there is a layer of grease, corrosion products and other deposits on the surface of the thread, it is difficult to remove the bolts.